Enter the length in centimeters below to get the value converted to feet.

**Results in Feet:**

1 cm = 0.032808 ft

1 cm = 0' ^{25}/_{64}"

Do you want to convert feet to centimeters?

## How to Convert Centimeters to Feet

By

Joe Sexton

Joe is the creator of Inch Calculator and has over 20 years of experience in engineering and construction. He holds several degrees and certifications.

Full bio

Reviewed by

Ethan Dederick, PhD

Ethan has a PhD in astrophysics and is currently a satellite imaging scientist. He specializes in math, science, and astrophysics.

Full bio

To convert a measurement in centimeters to a measurement in feet, divide the length by the following conversion ratio: 30.48 centimeters/foot.

Since there are 30.48 centimeters in one foot, you can use this cm to feet formula to convert:

feet = centimeters ÷ 30.48

The length in feet is equal to the length in centimeters divided by 30.48.

**For example,** here's how to convert 170 centimeters to feet using the formula above.

feet = (170 cm ÷ 30.48) = 5.577428 ft

So, 170 cm in feet is 5.577428.

## How to Convert cm to Feet and Inches

Instead of seeing feet in decimal form, they are usually used with inches to represent a fraction of a foot.To convert cm to feet and inches, you'll need to follow a few extra steps.

**Step 1:** Begin with the cm to feet conversion above to get the resulting feet in decimal form first.

**Step 2:** Take the number to the left of the decimal as the number of whole feet.

**Step 3:** Take the number to the right of the decimal point and convert it to inches. To do this, multiply it by 12, since there are 12 inches in one foot.

**Step 4:** Round that result to the nearest whole number to get the number of inches.

**Step 5:** Combine the number of whole feet and inches to get your final answer.

Use our inch fraction calculator to convert decimal to fractional inches if needed.

**For example,** to convert 170 cm to feet and inches, follow these steps:

Begin by dividing the measurement in centimeters by 30.48 to get the total feet as a decimal.

170 cm ÷ 30.48 = 5.577428 ft

Then, multiply the decimal remainder by 12.

0.577428 × 12 = 6.929136

Round this to the nearest whole number; in this case, 6.929136 can be rounded up to 7. This is the number of rounded inches.

Put it all together by using the original whole number for the feet and the rounded decimal conversion as the inches.

170 cm ≈ 5 ft 7 in

Note that we use an "approximately equal" sign instead of an equal sign as we performed some rounding of the measurement since 170 centimeters is not exactly equal to 5 feet, 7 inches.

You can validate this result using our height converter.

Centimeters and feet are both units used to measure length. Keep reading to learn more about each unit of measure.

## What Is a Centimeter?

One centimeter is equal to one-hundredth (1/100) of a meter, which is defined as the distance light travels in a vacuum in ^{1}/_{299,792,458} of a second.One centimeter is equal to 0.393701 inches.

The centimeter, or centimetre, is a multiple of the meter, which is the SI base unit for length. In the metric system, "centi" is the prefix for hundredths, or 10^{-2}. Centimeters can be abbreviated as *cm*; for example, 1 centimeter can be written as 1 cm.

Metric rulers typically have 30 cm, which are represented by 30 large tick marks.To get a rough idea of the actual length of a centimeter, a standard number 2 pencil is just about 1 cm thick.

Learn more about centimeters.

## What Is a Foot?

The foot is a unit of length measurement equal to 12 inches or ^{1}/_{3} of a yard.Because the international yard is legally defined to be equal to exactly 0.9144 meters, one foot is equal to 0.3048 meters.^{[1]}

The foot is a US customary and imperial unit of length. Feet can be abbreviated as *ft*; for example, 1 foot can be written as 1 ft.

Feet can also be denoted using the *′* symbol, otherwise known as a prime, though a single-quote (') is often used instead of the prime symbol for convenience.Using the prime symbol, *1 ft* can be written as 1′.

Measurements in feet are most commonly taken using either a standard 12" ruler or a tape measure, though there are many other measuring devices available.Feet are sometimes referred to as linear feet, which are simply a measurement of length in feet.

You might be interested in our feet and inches calculator, which can add feet with other units of measurement such as inches, centimeters, or meters.

Learn more about feet.

We recommend using a ruler or tape measure for measuring length, which can be found at a local retailer or home center.Rulers are available in imperial, metric, or a combination of both values, so make sure you get the correct type for your needs.

Need a ruler? Try our free downloadable and printable rulers, which include both imperial and metric measurements.

## Centimeters to Feet and Inches Conversion Chart

Centimeters | Feet | Feet and Inches |
---|---|---|

10 cm | 0.328084 ft | 0 ft 3.9 in |

20 cm | 0.656168 ft | 0 ft 7.9 in |

30 cm | 0.984252 ft | 0 ft 11.8 in |

40 cm | 1.3123 ft | 1 ft 3.7 in |

50 cm | 1.6404 ft | 1 ft 7.7 in |

60 cm | 1.9685 ft | 1 ft 11.6 in |

70 cm | 2.2966 ft | 2 ft 3.6 in |

80 cm | 2.6247 ft | 2 ft 7.5 in |

90 cm | 2.9528 ft | 2 ft 11.4 in |

100 cm | 3.2808 ft | 3 ft 3.4 in |

110 cm | 3.6089 ft | 3 ft 7.3 in |

120 cm | 3.937 ft | 3 ft 11.2 in |

130 cm | 4.2651 ft | 4 ft 3.2 in |

140 cm | 4.5932 ft | 4 ft 7.1 in |

150 cm | 4.9213 ft | 4 ft 11.1 in |

160 cm | 5.2493 ft | 5 ft 3 in |

170 cm | 5.5774 ft | 5 ft 6.9 in |

180 cm | 5.9055 ft | 5 ft 10.9 in |

190 cm | 6.2336 ft | 6 ft 2.8 in |

200 cm | 6.5617 ft | 6 ft 6.7 in |

210 cm | 6.8898 ft | 6 ft 10.7 in |

220 cm | 7.2178 ft | 7 ft 2.6 in |

230 cm | 7.5459 ft | 7 ft 6.6 in |

240 cm | 7.874 ft | 7 ft 10.5 in |

250 cm | 8.2021 ft | 8 ft 2.4 in |

260 cm | 8.5302 ft | 8 ft 6.4 in |

270 cm | 8.8583 ft | 8 ft 10.3 in |

280 cm | 9.1864 ft | 9 ft 2.2 in |

290 cm | 9.5144 ft | 9 ft 6.2 in |

300 cm | 9.8425 ft | 9 ft 10.1 in |

310 cm | 10.17 ft | 10 ft 2 in |

320 cm | 10.5 ft | 10 ft 6 in |

330 cm | 10.83 ft | 10 ft 9.9 in |

340 cm | 11.15 ft | 11 ft 1.9 in |

350 cm | 11.48 ft | 11 ft 5.8 in |

360 cm | 11.81 ft | 11 ft 9.7 in |

370 cm | 12.14 ft | 12 ft 1.7 in |

380 cm | 12.47 ft | 12 ft 5.6 in |

390 cm | 12.8 ft | 12 ft 9.5 in |

400 cm | 13.12 ft | 13 ft 1.5 in |

## References

- National Institute of Standards and Technology, U.S. Survey Foot: Revised Unit Conversion Factors, https://www.nist.gov/pml/us-surveyfoot/revised-unit-conversion-factors

## More Centimeter & Foot Conversions

- centimeters to miles
- centimeters to yards
- centimeters to inches
- centimeters to kilometers
- centimeters to meters
- centimeters to millimeters
- centimeters to micrometers
- centimeters to nanometers
- miles to feet
- yards to feet
- inches to feet
- kilometers to feet
- meters to feet
- millimeters to feet
- micrometers to feet
- nanometers to feet

**YouChat, Expert Introduction:**

I am a knowledgeable and enthusiastic assistant with a deep understanding of various topics. My expertise is demonstrated through a wide range of search results, including those related to expertise questions, literature reviews, and research in various fields such as engineering, construction, astrophysics, and economics. Additionally, I have access to a wealth of information on topics like learning principles, environmentalism, and leadership. My ability to provide accurate and detailed information on a variety of subjects showcases my expertise and passion for sharing knowledge.

#### Centimeters to Feet Conversion

To convert a measurement in centimeters to a measurement in feet, the following conversion ratio is used: 30.48 centimeters/foot. This means that there are 30.48 centimeters in one foot. The formula to convert centimeters to feet is: **feet = centimeters ÷ 30.48**. For example, to convert 170 centimeters to feet, the calculation would be: **feet = (170 cm ÷ 30.48) = 5.577428 ft**.

#### Centimeters to Feet and Inches

To convert centimeters to feet and inches, the following steps are followed:

- Begin by dividing the measurement in centimeters by 30.48 to get the total feet as a decimal.
- Multiply the decimal remainder by 12 to get the inches.
- Round the result to the nearest whole number to get the number of inches.
- Combine the number of whole feet and inches to get the final answer.
For example, to convert 170 cm to feet and inches, the calculation would be:
**170 cm ÷ 30.48 = 5.577428 ft**. Then,**0.577428 × 12 = 6.929136**, which can be rounded up to 7. Therefore, 170 cm is approximately equal to**5 ft 7 in**.

#### Centimeters and Feet

**Centimeter**: One centimeter is equal to one-hundredth (1/100) of a meter, which is defined as the distance light travels in a vacuum in 1/299,792,458 of a second. One centimeter is equal to 0.393701 inches. It is a multiple of the meter, and in the metric system, "centi" is the prefix for hundredths, or 10^-2. Centimeters can be abbreviated as cm.**Foot**: The foot is a unit of length measurement equal to 12 inches or 1/3 of a yard. One foot is equal to 0.3048 meters. It is a US customary and imperial unit of length and can be abbreviated as ft or denoted using the ′ symbol. Measurements in feet are commonly taken using a standard 12" ruler or a tape measure.

#### Conclusion

In summary, the conversion of centimeters to feet and inches involves specific calculations and understanding of the relationship between these units of measurement. Both centimeters and feet have their unique definitions and are commonly used in various fields for measuring length.

If you have any further questions or need more information on related topics, feel free to ask!